helpline:+86 15333853330

Service time

24 Hours Service

Write to us

[email protected]

Contact Us+8613849867826

  • Stirrup Bar Bending Machine
    Stirrup Bar Bending Machine

    Automatic stirrup bender(GTW4-12A) adopts Italian technology, through the company's technical department for many years of research and development, painstaking design, has...

  • CNC Steel Bar Stirrup Bender
    CNC Steel Bar Stirrup Bender

    This machine greatly improves the working efficiency. It has been exported to Israel, Russia, Romania,India etc, more than 20 countries, since it was put on the market, has...

  • Rebar Bender Machine
    Rebar Bender Machine

    After years of research and development and repeated trials by our company, this is a durable and reliable steel processing product.

  • Automatic Rebar Bending Machine
    Automatic Rebar Bending Machine

    GWC-60 is developed by our company for many years, the main features of this machine: easy to operate, low noise, large power, and equipped with foot switch.

  • Steel Bar Wire Mesh Welding Machine
    Steel Bar Wire Mesh Welding Machine

    Automatic stirrup(ZGW4-14)uses Italian technology. Since it was put into the market, it has been well received by the majority of customers.

  • CNC Stirrup Bender Center
    CNC Stirrup Bender Center

    The equipment has the advantages of simple operation and convenient and economical operation. It is especially suitable for all kinds of engineering tenders and steel refineries.

  • Automatic Rebar Straightening Cutting Machine
    Automatic Rebar Straightening Cutting Machine

    This machine was developed by our company's technology department, and large-diameter steel bars are used again.

  • Steel Bar Straightening Machine
    Steel Bar Straightening Machine

    This machine is a combination of straightening, drawing and cutting machine developed by our technical department for many years.

  • Wire Straightener and Cutter Machine
    Wire Straightener and Cutter Machine

    It is easy to understand and convenient to operate.
    It is suitable for re-processing and utilization of waste and used steel bars.

  • Electric Bar Bender
    Electric Bar Bender

    Machine is solid and reliable.
    The 16mm panel is suitable for large steel bars and long-term work.
    The material of the bending attachment is 40Cr

  • Manual Steel Bar Bender
    Manual Steel Bar Bender

    The host material is made of 45 carbon structural steel
    Equipped with anti-leakage device
    Stable operation and low noise

  • Electric Rebar Cutter
    Electric Rebar Cutter

    The product is light and easy to use.
    Gear shaft material uses 45# carbon steel.

  • First Prev 1234567 Next Last

    Contact Us

    Tel: +86 15333853330

    Email: [email protected]

    Add: Heya Liu Village, Zengfumiao Township, Changge City, Henan Province, China.

  • Electric Rebar Cutter

    Tile Adhesive Trowels - Buy Online - Australia Wide Delivery

    2021-3-12 · Looking for the best price for Tiler's Trowels? Buy online and save Australia's largest online tile and paver website

  • Electric Rebar Cutter

    INTERTAC PLUS Pressure Sensitive Adhesive

    2021-2-3 · 1.6mm x1.6mm 'V1" notched trowel. For securing Interface Glasbac Carpet tiles the use a log nap roller with a pile height of no less than 10mm is recommended. Alternatively applying adhesive with a 1.6mm x1.6mm notched "V1" notched trowel is also recommended.

  • Electric Rebar Cutter

    HIGH GRADE NON SLUMP FLEXIBLE TILE ADHESIVE

    2019-5-31 · a 6mm trowel for wall tiles up to 200x200mm. Use a 10mm trowel for tiles up to 300x 300. For tiles 300x300 and larger use a 12mm trowel. Tiles that are 400x400 and over need to be back buttered. Use the flat side of the trowel to apply adhesive to the back of the tile about 1-2mm thick. NOVAFLEX can be applied at a bed minimum thickness between ...

  • Electric Rebar Cutter

    SALS Flex Adhesive - Architecture & Design

    2018-8-28 · Fix according to the manufacturer's instructions, making sure the surface is ... use a 6 x 6 x 6mm trowel on walls, 10 x 10 x 10mm trowel on floors. Before fixing tiles, ensure the back of the ...

  • Electric Rebar Cutter

    Trowel Size Matters | Tile Trowel Size Guide | DIYTileGuy

    2021-2-13 · This trowel would be used for some of the thicker uncoupling heat membranes (check with the manufacturer). This sized notch trowel is also a great size for installing 12x12s, 13×13's, and 16×16's. Additionally, I like to use this size trowel for the bigger "subway" tiles such as the 4×12's and 4×16's.

  • Electric Rebar Cutter

    HIGH GRADE NON SLUMP FLEXIBLE TILE ADHESIVE

    2017-7-9 · As a general guide use a minimum 10mm notched trowel for floor tiles and a minimum 6mm notched trowel for wall tiles. NOVAFLEX can be applied at a bed thickness between 2 to 10mm. Tiles must be firmly pressed into the freshly troweled adhesive. Slide the tile at a right angle to the notch pattern to ensure coverage is achieved.

  • Electric Rebar Cutter

    Durotile Flex - Durotech Industries - Durotech Industries

    2017-10-4 · for floor tiles and a minimum 6mm notched trowel for wall tiles. Durotile Flex can be applied at a bed thickness between 2 to 10mm. Tiles must be firmly pressed into the freshly troweled adhesive. Slide the tile at a right angle to the notch pattern to ensure coverage is achieved. For tiles which are uneven or have lugs on the back of the

  • Electric Rebar Cutter

    Tile & Stone Installation Systems - ARDEX Australia

    Stainless Steel Square 8mm Notch Trowel. Go to product. Tiling Trowels – 6mm Notch. Stainless Steel Square 6mm Notch Trowel. Go to product. SALS Express. Simple Accurate Levelling System - Buy Online Now. A Simple Accurate Levelling System for a more precise, faster installation; Eliminates lippage and the unwanted uneven joints between tiles ...

  • Electric Rebar Cutter

    What Size Trowel to Use for Tile - TileTools

    Finding the right trowel for the job is quite simple when you know that, generally speaking, the trowel size should match up to the tile size – the smaller the tile, the smaller the trowel; the larger the tile, the larger the trowel. The other main consideration is where the tiles will be set, on the floor .

  • Electric Rebar Cutter

    Manufacturer, Exporter & Supplier of Tile Adhesive in ...

    Advantage: Exceeds type 2 requirement high strength, extended open time for fixing of ceramic tile on floor and wall. Suitable Surface: Cement plaster, cement mortar bed, concrete, on ceramic tile and stone ( when mixed with home pride 93 mortar admix) brick masory, cement terrazzo. Coverage: Approximately 55-60 sq. ft. per 20 kg bag with a ¼"X ¼"(6mm X 6mm) square notch trowel for a bed ...

  • Electric Rebar Cutter

    Armstrong Flooring Inc.

    An industry-leading manufacturer of innovative flooring products focusing on design, performance and durability for the home and commercial applications.

  • Electric Rebar Cutter

    INTERTAC PLUS Pressure Sensitive Adhesive

    2021-2-3 · 1.6mm x1.6mm 'V1" notched trowel. For securing Interface Glasbac Carpet tiles the use a log nap roller with a pile height of no less than 10mm is recommended. Alternatively applying adhesive with a 1.6mm x1.6mm notched "V1" notched trowel is also recommended.

  • Electric Rebar Cutter

    SALS Flex Adhesive - Architecture & Design

    2018-8-28 · Fix according to the manufacturer's instructions, making sure the surface is ... use a 6 x 6 x 6mm trowel on walls, 10 x 10 x 10mm trowel on floors. Before fixing tiles, ensure the back of the ...

  • Electric Rebar Cutter

    Epoxy Flooring Specialists | Concrete Epoxy Resin Floor ...

    2021-5-26 · Trowel Coat Epoxy Flooring and Polyurethane Cements. Applied at 4-6mm Trowel Coat Epoxies and PU Cements are used to create long lasting, easy clean, slip resist floors. Commonly used in kitchens, deli's, supermarkets, butchers, laboratories. .

  • Electric Rebar Cutter

    Manufacturer, Exporter & Supplier of Tile Adhesive in ...

    Advantage: Exceeds type 2 requirement high strength, extended open time for fixing of ceramic tile on floor and wall. Suitable Surface: Cement plaster, cement mortar bed, concrete, on ceramic tile and stone ( when mixed with home pride 93 mortar admix) brick masory, cement terrazzo. Coverage: Approximately 55-60 sq. ft. per 20 kg bag with a ¼"X ¼"(6mm X 6mm) square notch trowel for a bed ...

  • Electric Rebar Cutter

    RLA LITE Tile Adhesive

    2020-7-2 · For mosaic tiles use a 6mm x 6mm square notched trowel. • For wall tiling use 6mm x 6mm square notched trowel for tiles up to 150mm x 150mm. For tiles larger than 150mm x 150mm use a 10mm x 1Omm square notched trowel. • RLA LITE should be applied onto the substrate at a rate of 1m2 at a time. Application rates greater than this can result ...

  • Electric Rebar Cutter

    Luxury Italian Floor and Wall Tiles - Rex | Florim S.p.A. SB

    Discover Rex floor and wall tiles: the most glamorous Florim brand offers a wide range of luxury porcelain stoneware tiling and flooring. Find out more at Florim

  • Electric Rebar Cutter

    Armstrong Flooring Inc.

    An industry-leading manufacturer of innovative flooring products focusing on design, performance and durability for the home and commercial applications.

  • Electric Rebar Cutter

    Laying Tiles - How to Lay Tiles - DIY Tile Installation ...

    For floor tiles use a 12mm notched trowel to spread adhesive. By using a notched trowel, the adhesive is applied leaving little tracks on the floor. Once the tiles are "bedded" into place these notches will flatten out to leave a bed of adhesive 6mm thick.

  • Electric Rebar Cutter

    VICTORIAN FLOOR TILES FIXING GUIDE

    2012-8-26 · Victorian Floor Tiles and should not be relied upon as such. If you are ... because they can permanently stain your tiles. small Pointing troWel For getting the adhesive out of the container and on to the floor or wall ... 3-6mm thick . Use the adhesive recommended by a reputable adhesive ...

  • Electric Rebar Cutter

    Dura-Fix Polymod

    2020-10-26 · Dura-Fix Polymod HIGH STRENGTH, SUPERIOR GRADE TILE ADHESIVE FOR FRAMED FLOORS DESCRIPTION Dura-Fix Polymod is a premium grade non slip, non-slump, flexible white tile adhesive designed to withstand movement in substrates. Dura-Fix Polymod is the ultimate when it comes to tile adhesives, with its superior adhesion strength and flexibility. With its unique PFR .

  • Electric Rebar Cutter

    6mm V-Notch Trowel for Timber Flooring | Imperial Flooring ...

    6mm Trowel V-Notch for Timber Flooring Ultraset 3in1 & Ultramax 3in1 Acoustic and moisture barrier adhesives. View our full flooring system packages and purchase all your flooring from start to finish with Imperial Flooring Australia's Range.

  • Electric Rebar Cutter

    Acoustiflor - Tilers Trade Centre

    2017-8-29 · Pour the mixture onto the floor and spread using a 6mm Dribond pegged trowel to achieve a minimum thickness of 6mm over the entire floor. Screed the mixture with the acoustic trowel into the corners and against the walls. Pull the trowel towards you to achieve the required thickness. This must be done quickly before

  • Electric Rebar Cutter

    INTERTAC PLUS Pressure Sensitive Adhesive

    2021-2-3 · 1.6mm x1.6mm 'V1" notched trowel. For securing Interface Glasbac Carpet tiles the use a log nap roller with a pile height of no less than 10mm is recommended. Alternatively applying adhesive with a 1.6mm x1.6mm notched "V1" notched trowel is also recommended.

  • Electric Rebar Cutter

    Manufacturer, Exporter & Supplier of Tile Adhesive in ...

    Advantage: Exceeds type 2 requirement high strength, extended open time for fixing of ceramic tile on floor and wall. Suitable Surface: Cement plaster, cement mortar bed, concrete, on ceramic tile and stone ( when mixed with home pride 93 mortar admix) brick masory, cement terrazzo. Coverage: Approximately 55-60 sq. ft. per 20 kg bag with a ¼"X ¼"(6mm X 6mm) square notch trowel for a bed ...

  • Electric Rebar Cutter

    UNIGRIP - Tilers and Trade Shop

    2017-1-20 · For mosaic tiles use a 6mm x 6mm square notched trowel. • For wall tiling use Bmm x Bmm square notched trowel for tiles up to 150mm x 150mm. For tiles larger than 150mm x 150mm use a 10mm x 1Omm square notched trowel. • UNIGRIP should be applied onto the substrate at a rate of 1 m2 at a time. Application rates greater than this can result ...

  • Electric Rebar Cutter

    Laying Tiles - How to Lay Tiles - DIY Tile Installation ...

    For floor tiles use a 12mm notched trowel to spread adhesive. By using a notched trowel, the adhesive is applied leaving little tracks on the floor. Once the tiles are "bedded" into place these notches will flatten out to leave a bed of adhesive 6mm thick.

  • Electric Rebar Cutter

    Ultraflex - Davco

    2019-10-17 · TILE SIZE TROWEL NOTCH SIZE BACK BUTTERING REQUIRED Mosaic tiles 6mm 150 x 150mm 6mm 150 x 150mm and over 10mm 400 x 400mm and over 12mm Any tile size with uneven back, lugs or grooves As above dependent upon tile size SURFACE PREPARATION • All surfaces must be installed according to manufacturer's

  • Electric Rebar Cutter

    Multipurpose Adhesive Powder for Floor and Wall Tiles

    2020-1-23 · AS3958.Use the appropriate notched trowel to achieve coverage. As a general guide, use a 6 x 6 x 6mm trowel on walls, 10 x 10 x 10mm trowel on floors. Before fixing tiles, ensure the back of the tiles are free from dust. Spread approximately one square metre at a time ensuring that a skin has not developed prior to bedding the tiles.

  • Electric Rebar Cutter

    SE-7 - Davco

    2017-5-8 · TILE SIZE TROWEL NOTCH SIZE BACK BUTTERING REQUIRED Mosaic tiles 6mm Wall tiles up to 150 x 150mm 6mm Wall/floor tiles 150 x 150mm and over 10mm 400 x 400mm and over 12mm Any tile size with uneven back, lugs or grooves As above, dependent upon tile size SURFACE PREPARATION • All surfaces must be installed according to manufacturer's

  • compactor 825 manufacturer Iran
  • Wire Mesh Welding Machine center Australia
  • 3 trowell ave manufacturer Ukraine
  • rammer 3288 automatic Ukraine
  • Concrete Power Trowel Machine automatic Australia
  • w rose trowel 11 Price Spain
  • compactor minecraft automatic Israel
  • 1 4 steel rod bender Factory Supply Thailand
  • rammer 3288 specs Vietnam
  • compactor xxl leroy merlin for sale South Africa

Recommended